Umhloli wokuqina we-LT-ZP24
Imingcele yezobuchwepheshe |
1. Ibanga lokulinganisa: 15 ~ 300mN.m |
2. Ukunemba: ±0.6mN ngaphansi kuka-50mN, okunye ±1% |
3. Isixazululo: 0.1mN |
4. Ibonisa ukuhlukahluka kwevelu: ≤1% |
5. Ubude bokugoba: okuyisithupha okungalungiseka: (50/25/20/15/10/5 ±0.1)mm |
6. I-engeli yokugoba: (±7.5º noma ±15º) (1-90° iyalungiseka) |
7. Layisha ubude be-lever: 200°±20°/min |
8. Isivinini sokugoba: 7.5s~35s esilungisekayo |
9. Isibonisi sedatha: 5.7in isibonisi sekristalu esiwuketshezi, nesibonisi sejika |
10. Okuphumayo kokuphrinta: iphrinta ehlanganisiwe eshisayo ye-modular |
PumzilaFidla |
1.7.5° kanye no-15° ukuhlolwa kokuqina ((1 ~ 90)°; Ukuqina nokuqina kungahlolwa. |
2. Ngomsebenzi wokuhlola we-zero othomathikhi. |
3. Ukuguqulwa kwe-Angle yokuhlola kulawulwa ngokugcwele yi-motor, okuthuthukisa ukusebenza kahle kokulinganisa futhi kunciphise ithonya lomuntu. |
4. Izinhlobo ezintathu zobude bokugoba zingahlolwa: 50mm, 25mm, 10mm. |
5. Ngezibalo zokulinganisa, ukuphrinta neminye imisebenzi, isikhathi sokulinganisa, i-Angle ingasethwa. |
6. Ngemva kokuphothulwa kokuhlolwa, buyela endaweni yokuqala ngesivinini esikhulu, futhi isivinini sokubuya singasethwa ngokungafanele phakathi kuka-(7.5 ~ 35) s. |
7. Isixhumi esibonakalayo somshini womuntu sisebenzisa ijika le-LCD elinesikrini esikhulu esingu-5.7, ukuqina kwesibonisi sesikhathi sangempela kanye nejika lesikhathi, ukusebenza okulula nokulula. |
8. Ithuluzi linomsebenzi wokuhlola, ukubonisa, inkumbulo, izibalo kanye nokuphrinta amapharamitha ahlukahlukene afakwe kuzinga, ukuhlinzeka ngokuhlaziywa kwedatha yesayensi yokutholwa kokuqina kwekhadibhodi. |
Okujwayelekile |
Ngokuhambisana ne-GB/T 2679•3 “Ukuzimisela kokuqina kwephepha nebhodi”, i-GB/T 23144 “Ukuzimisela kokuqina kwephepha nebhodi okugoba okumile Umgomo ojwayelekile”. |