LT-ZP44 Integrating sphere colorimeter | Integrating sphere colorimeter
|
Technical parameters |
| 1. Lighting/measurement conditions: D/8 (diffused light illumination, 8° reception) |
| 2. Sensor: photodiode array |
| 3. Integrating ball diameter: 40mm |
| 4. Spectrum separation equipment: diffraction grating |
| 5. Measurement wavelength range: 400nm-700nm |
| 6. Measurement wavelength interval: 10nm |
| 7. Half wave width: <=14nm |
| 8. Reflectivity measurement range: 0-200%, resolution: 0.01% |
| 9. Lighting source: composite LED lamp |
| 10. Measurement time: about 2 seconds |
| 11. Measuring diameter: 8MM |
| 12. Repeatability: 0.05 |
| 13. Difference between stations: 0.5 |
| 14. Standard observer: 2° viewing Angle, 10° viewing Angle |
| 15. Observe light source :A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12(two light sources can be selected at the same time for display) |
| 16. Display content: spectral data, spectral map, chrominance value, color difference value, pass/fail, color simulation |
L*a*b*, L*C*h, CMC(1:1), CMC(2:1), CIE94, HunterLab, Yxy, Munsell, XYZ, MI, WI(ASTME313/CIE), YI(ASTME313/ASTMD1925), ISO Brightness(ISO2470), DensitystatusA/T, CIE00, WI/Tint |
| 18. Storage: 100*200 (100 groups of standard samples, each group of standard samples under the maximum 200 test records) |
| 19. Interface: USB |
| 20. Power supply: removable lithium battery pack 1650 mAh,
Dedicated AC adapter 90-130VAC or 100-240VAC, 50-60 Hz, Max. 15W |
| 21. Charging time: about 4 hours – 100% capacity, the number of measurements after each charge: 1,000 measurements within 8 hours |
| 22. Light source life: about 500,000 measurements |
| 23. Operating temperature range: 10 ° C to 40 ° C (50° to 104°F), 85% maximum relative humidity (no condensation) |
| 24. Storage temperature range: -20 ° C to 50 ° C (-4° to 122°F) |
| 25. Weight: Approx. 1.1 kg (2.4 lb) |
| 26. Dimensions: approx. 0.9 cm *8.4 cm *19.6 cm (H * W * L) (4.3 inches *3.3 inches *7.7 inches) |
|
Product Feature |
| 1. Wide application: can be used in laboratory, factory or field operation. |
| 2. Easy to count: large graphic LCD display. |
| 3. Fast color comparison: Allows for quick measurements and comparison of two colors without creating tolerances or storing data. |
| 4. Special “Project” mode: Multiple color standards can be collected as part of the company’s color standards program in a single recognizable
Under the project. |
| 5. Pass/Fail mode: Up to 1,024 tolerance standards can be stored for easy pass/fail measurement. |
| 6. Various measurement aperture sizes, in order to adapt to various measurement areas, provide a measurement area of 4 mm to 14 mm. |
| 7. Compatibility between instruments: extraordinary compatibility to ensure the consistency of multiple instrument color control. |
| 8. The device can use color, soft, and tri-stimulus calculations to measure coverage, color intensity, and can target plastic,
Precise color control for spray or textile material products performs the 555 color light classification function. |
| 9. Texture and gloss effects: Simultaneous measurements include specular reflection (true color) and exclusion of specular reflection (surface color) data,
Help to analyze the influence of the surface structure of the sample on the color. |
| 10. Comfortable ergonomics: The wrist strap and tactile side handles are easy to hold, while the target base can be flipped for added flexibility. |
| 11. Rechargeable battery: Allow remote use. |
Write your message here and send it to us
