LT-WY18 Bathroom type load tester

Short Description:

This machine is mainly used for the load performance test of shower room, bathtub, toilet, basin, water nozzle, water tank, hardware pendant, bathroom handrail and other products.

Send email to us

Product Detail

Product Tags

Technical Parameters

The serial number	According to project name	Want to ask
1	The sensor	500 kg, 50 kg
2	The test speed	0.01-500 - mm/min
3	Up and down distance	100 mm - 1600 mm
4	Left to right distance	100 mm - 1600 mm
5	The test fixture	For each set of tests, there is one set of fixtures
6	Control system	Computer controlled closed-loop servo system (including one set of brand computer + printer)
7	Overall dimensions	Length 2570* width 2570* height 2260mm
8	Electrical source	220 v, 5 a
9	Structure.	Industrial aluminium profile
Compliance with standards and terms

category	The name of the standard	Standard terms
Sanitary ceramics	GB6952-2015.	5.7 load resistance test
Bath crock	JC/T 779-2010	7.8 load test
Shower room	QB2584-2007.	5.5.1 bottom basin load (HC/T 779-2000 8.2.7)
The bathroom accessories	QB T1560-2006	5.2 deformation test
Smart toilet	JG/T285-2010	7.12.2.1 seat strength test
Smart toilet	JG/T285-2010	7.12.2.2 strength of toilet cover
The water tank	GB 26730-2011	6.25 forward thrust test of external water tank
The water tank	GB 26730-2011	6.26 deformation resistance test of concealed water tank
rack	GB 26730-2011	6.28 rack safety load test
Floor drain	GB/T 27710-2011	7.5.1 carrying capacity
Water mouth	GB 18145-2014	8.6.5 resistant load
Smart toilet	CBMF 15-2016	9.4.5.1 seat strength test
Smart toilet	CBMF 15-2016	9.4.5.2 strength test of cover plate
Toilet seat ring and cover	JC/T 764-2008	5.4.8 static load
The bathroom accessories	IAPMO IGC. 186-2004 a	6.1 Wall Mounted Bathroom Accessories load test
The bathroom handrails	ASTM F446-1985 (2009).	7.2 Grab Bars
The bathroom handrails	ASTM F446-1985 (2009).	7.3 Bathing Area Accessories
Shower room	IAPMO IGC. 154-2013	5.7.2 Threshold load test
Shower room	IAPMO IGC. 154-2013	5.7.3 Side Load Test for Fittings
Shower room	IAPMO IGC. 154-2013	5.7.4 Test Load for Fittings
Shower room	IAPMO IGC. 154-2013	5.9 Load Test for Doors
Shower room	IAPMO IGC. 154-2013	5.10 Load Test for Floor-Mounted Showers
Plastic water supply unit	CSA B45.5-11 / IAPMO Z124-2011 (2016) reaffirmed	5.2.1.1 Load test for grab bars
Plastic water supply unit	CSA B45.5-11 / IAPMO Z124-2011 (2016) reaffirmed	5.8.1 load test for bathtub and small seats
Plastic water supply unit	CSA B45.5-11 / IAPMO Z124-2011 (2016) reaffirmed	5.8.2 Load test for bathtub rims and bottoms and small thresholds and bottoms