LT-SJN15 Automatic plug and pull force test machine | plug and pull force test machine | microcomputer plug and pull force test machine
|
Technical parameter |
| 1. Specified maximum load: 50,20,10,5,2 KG (choose any one) |
| 2. Minimum decomposition degree: 0.01G |
| 3. Maximum measured height: 150mm |
| 4. Minimum fine-tuning distance: 0.01mm |
| 5. Determination speed range: 0~200mm / min |
| 6. Movement range of X and Y axis: 0~75mm |
| 7. Transmission mechanism: ball screw |
| 8. Drive motor: Panasonic servo motor |
| 9. Appearance size: 400 * 300 * 1000mm |
| 10. Weight: 75 KG (machine) |
| 11. Power supply: AC220V |
| 12. Standard equipment: control system (industrial computer and control interface, 17-inch liquid crystal display, attached ink-jet color printing meter machine)Window System plug and pull control operation software
Loved weight: a. One set; b. X-Y traveling carriage |
|
Characteristic |
| 1. Store graphics (plug and plug displacement curve, life curve, check report); |
| 2. Test data are stored on a hard disk (each data can be stored, unlimited times); |
| 3. The test conditions can be set by the computer screen, convenient and fast (including plug and pull trip, speed, pause time, etc.); |
| 4. The title content of the inspection report can be modified at any time (both Chinese and English); |
| 5. The inspection report can be transferred to EXCEL. The WORD does the editing. |
| 6. Single hole plug test; |
| 7. Connector whole row plug and unplug test; |
| 8. Connector plug and plug life test; |
| 9. Connector single Pin and plastic holding force test |
| 10. Connector Normal Force test; |
| 11. General compression, tensile failure test; |
| 12. Can connect with the contact impedance machine at the same time (purchase); |
| 13. Solve the clamp problem of various connector tests, and the bus connector can automatically align during the test, and there will be no unilateral problem of eating it. |
