LT-JJ80-2-Double station cabinet door hinge comprehensive testing machine
Technical Parameters:
LT-JJ87-2 Double Station Hinge Durability Tester(Servo Control).
1.Test speed:1-15 times/min(adjustable)
2.Test angle:1-180°(adjustable)
3.Weights:1kg,8pcs
4.Number of stations:2 stations
5.Motor:2 sets(Japan Panasonic servo motor)
6.Standard door:700*600:four,500*400:two
7.Customized door frame:made of high-strength industrial aluminum profile,and with a base
8.Control system:PLC man-machine interface
9.Power supply:220V,15A
Standards:
BS EN 15570-2008 Hardware for furniture.The strength and durability of the hinges and their components
QB/T 2189-2013 Furniture hardware–Cup-shaped concealed hinge
Product Description:
It is suitable for the vertical static load of finished hinges and semi-finished hinges of cabinet doors.Horizontal static load.Operating force.Durability tested.Simulate the process of common use
In the case of the hinge,the hinge is repeatedly opened and closed,and the hinge is checked for damage or other conditions that affect the use of the hinge after a certain number of cycles.
Test items:
Durability test:put a certain load on the cabinet door and hinge,carry out repeated opening and closing actions,and check the hinge after a certain cycle
Whether the chain can still meet the requirements for use.
Vertical static load:Hang the specified load at 100mm from the farthest side of the cup-shaped dark hinge,and reciprocate the opening and closing of the door 10 times
Each time from 45 degrees away from the fully open position to 10 degrees away from the full open position,1 reciprocating cycle is counted 1 time,the maximum
The opening angle is 135 degrees from the full-off position.
Horizontal static load:In the fully open position of the door,the specified load is applied to the cup-shaped dark hinge perpendicular to the plane of the door
100mm on the horizontal centerline of the side,the test is carried out 10 times,and the test is checked after unloading
