LT-JC05 Transmission Locker Fatigue Tester

1. Structure: (Aluminum profile)

2. It is suitable for casement, upper and lower suspension door and window transmission locks

3. Transmission mode: rotary cylinder + push-pull cylinder

4. Torsion angle: 0-180 degrees adjustable

5. Torsion speed: 0-20 times/min adjustable

6. Weight: 70N

7. Control mode: PLC+touch screen

8. Volume: length 1.5*width 0.7*height 1.8 meters

9. Power supply: AC220V, 50HZ

Standards:

Conform to the standard: JG/T 126-2017 transmission lock

-5.4.5 Repeated opening and closing -6.4.5 Repeated opening and closing

 Test Method:

5.4.5 Repeated opening and closing

5.4.5.1 Deadboltless drive lockers

After the opening and closing cycle according to the frequency of use, each component should have no distortion, no deformation, and no impact on normal use.

5.4.5.2 Transmission latches with deadbolts

After the opening and closing cycle according to the frequency of use, each component should have no distortion, no deformation, and no impact on normal use.

6.4.5 Repeated opening and closing

6.4.5.1 Deadbolt-free drive locks

After the opening and closing cycle according to the frequency of use, each component should have no distortion, no deformation, and no impact on normal use.

6.4.5.2 Transmission lockers with deadbolts

After the opening and closing cycle according to the frequency of use, each component should have no distortion, no deformation, and no impact on normal use