ibe

Ngwaahịa

LT – JJ29 – B matraasi GB nke kọmpụta na-agbagharị, ihe nlegharị anya na altimeter tester (na-atụgharị + blanking + altimeter)

Nkọwa dị mkpirikpi:

Matraasi akpọrepu ule anwụ anwụ bụ ime ka igwe mmadụ na-ehi ụra haziri igwe na-akpụ akpụ na-aga n'ihu, na-akpụgharị ịdịte aka bụ iji igwe na-akpụ akpụ a na-ebu ibu n'okpuru matraasi kwụ ọtọ, na-atụgharị n'otu oge, ihe na-ebugharị matraasi, iji nwalee matraasi na ogologo oge. repeatability nke Rolling ibu ikike, anwụ ngwa ngwa bụ isi iji nwalee matraasi n'ọnụ anwụ anwụ nke onu, izute chọrọ nke ụdị nile nke matraasi emeputa na ọkọlọtọ. A na-eji ya na-ekpebi àgwà na ndụ ọrụ nke matraasi ma na-agbasosi ike n'ihe achọrọ nke ọkọlọtọ mba maka nyocha igwe. Kwesịrị ekwesị maka akwa akwa mmiri siri ike, akwa mmiri mmiri nkịtị, matraasi ụfụfụ, matraasi na-agbanwe agba aja aja.


Nkọwa ngwaahịa

Mkpado ngwaahịa

 

Usoro nka

1. Ọnọdụ njikwa: njikwa kọmputa
2. Pavement anwụ ngwa ngwa ule ngwaọrụ: 1) Mechanical ngwaọrụ nke nwere ike na-anya ụgbọ ala na-eme ka ikwu kehoraizin ije n'elu nke matraasi: na-atụgharị oge nke inertia nke ala bụ (0.5 ± 0.05) Kgm2, loading ugboro kwesịrị ịbụ (. 16 ± 2) ugboro / min, ibu static kwesịrị ịbụ (1400 ± 7) N, na oge ule bụ> 30000 ugboro.

2) ala: oval udi, mpụga akụkụ ndidi bụ ± 2mm, elu kwesịrị ịdị ike, ire ụtọ, na-enweghị scratches ma ọ bụ ndị ọzọ n'elu ntụpọ, ogologo (1000 ± 2) mm, esemokwu esemokwu n'etiti (0.2 ~ 0.5), chamfering Angle nke roller : R30, kacha dayameta nke ala: 300± 1mm;

3) moto: panasonic servo moto nke Japan;

4) njem ule: banyere 250mm nke etiti etiti nke matraasi;

5) izi ezi nke ihe nleba anya ike agaghị abụ ihe na-erughị 1%, izi ezi nke ngwaọrụ nha agaghị abụ ihe na-erughị 1mm, na ngbanwe ọnọdụ nke ngọngọ nkwụnye ga-abụ ± 5mm.

3. Ngwaọrụ nyocha nke ịdịte aka n'akụkụ: 1) nha nha nha: 380 * 495 * 75mm. Elu ya siri ike ma dịkwa nro. Ejikọtara ya na akụrụngwa ule ma nwee ike ịtụgharị na elu kwụ ọtọ gburugburu axis kwụ ọtọ

2) ike nkwụnye ego kwụ ọtọ: 1000N

3) ngụkọta ọnụọgụ ule: 5000

4) ijide oge:(3±1) s

4. Ngwaọrụ nha nha: 1) nha nha nha nha: ± 0.5mm;

2) akwa nha nha: elu nha bụ cylinder siri ike ma dị larịị;

3) dayameta nke mpe mpe akwa: 100mm, chamfering R10;

4) ngwa ngwa ngwa nke mpe mpe akwa: 100 ± 20mm / min;

5) ike ala kwụ ọtọ: tinye ike 4N, mgbe ahụ, ebe dị anya n'etiti elu dị n'okpuru elu nke pad okirikiri na efere bụ elu nke akwa akwa akwa; Ntụle elu: elu nke mbụ matraasi elu, 100 ugboro, 29,900 ugboro nke ntachi obi ule, n'otu n'otu na-atụle elu nke matraasi elu; Sistemu Altimeter: ngwa ngwa na-edozi uru ike, a na-etinye ike n'ụzọ kwụ ọtọ n'ụzọ nke ịtọ ọsọ, yana njikọ PLC ozugbo.

5. Ihe nlele nlele kacha elu: 2400mm × 2400mm × 440mm
6. Nnwale tebụl ihe: igwe anaghị agba nchara
7. Elu nke tebụl ule si n'ala: 180mm
8. Mpụga akụkụ: 3320*2400*2280mm (ogologo * obosara * elu)
9. Ibu: banyere 2.3 tọn
10. Ike ọkọnọ na ike: AC2201V 50HZ otu-adọ banyere 2KW

Njirimara ngwaahịa

1. Akụrụngwa na-ezute ụzọ ule atọ: pavement rolling inte test, test inte test and pad high test.
2. Enwere ike nweta nsonaazụ ule na-akpaghị aka site na njikwa kọmputa. Ụdị ule abụọ na-arụ ọrụ na-akpaghị aka na njikwa ntuziaka na otu bọtịnụ.
3. The n'ibu Ọdịdị nke gantry na-nakweere na Rolling anwụ ngwa ule nke pavement, na elu-thrust servo moto na elu-nkenke arọ-ọrụ linear ndu okporo ígwè dị ka ndị na-anya ụgbọ ala akụkụ; Kwesịrị iji ihuenyo mmetụ aka ama ama ama dị ka njikwa ntinye, mee ka njikwa ọrụ dịkwuo mma na nkenke.
4. The roller loading nke pavement anwụ ule na-anabata linear sliding bearing maka free loading; N'ime ule ogologo oge, a na-eji ngọngọ loading na linear sliding bearing maka nbudata n'efu, n'ihi na ọ bụ naanị eriri na-agbagharị na-agbagharị agbagharị dị, ya mere enwere ike ịkwenye izi ezi nke ike ịkwanye. Ya mere, ike nbudata na-adabere na ọkọlọtọ chọrọ.
5. Ọdịdị mara mma ma mara mma: wiwi zoro ezo nke ọma, iji gbochie nkwụsịtụ n'oge ọrụ na ihe ize ndụ nke usoro ọkụ ọkụ ọ bụla; A na-eji igwe anaghị agba nchara, nke nwere elu dị larịị, dị mma maka ịkwanye matraasi; Ngwunye efere ígwè zuru ezu, ọ dịghị mkpa ịkụ ọkpọ iji dozie ala, hụ na ngwá ọrụ adịghị emegharị, emela ịma jijiji.
6. Test pad elu ule na servo moto na-eji dị ka mbanye na-anwale na ọsọ kpọmkwem na ọkọlọtọ, na-egosipụta curve graph n'etiti ike uru pressurized site loading mpe mpe akwa na ụdị na kwekọrọ ekwekọ sag uru, na-akpaghị aka na-atụle. elu.
7. A na-eji ihe na-emepụta ihe na-emepụta ihe na-emepụta ihe dị mma nke na-eji ejiji dị mma, elu dị mma, enweghị mgbawa, enweghị nrụrụ na ogologo ndụ ọrụ.
8. Rolling ule midpoint n'ọnọdu, na-akpaghị aka chọta midpoint nke matraasi, ọ dịghị mkpa iji aka reposition, PLC mmalite pointing.
9. Usoro nchịkwa mmadụ, interface dị mfe, ọrụ zuru oke, nzaghachi ọsọ ọsọ nke ihuenyo mmetụ, dị mfe iji rụọ ọrụ.
10. Enwere ike ibipụta nsonaazụ ule site na ngwa nbipute dịka usoro faịlụ nke onye ahịa chọrọ.
11. Nchedo data: chekwaa na-akpaghị aka mgbe ike kwụsịrị (nwere ike ịchekwa data na-akpaghị aka mgbe ọkụ kwụsịrị).
12. A na-ejikọta ntọala ahụ site na profaịlụ aluminom mmepụta ihe dị elu na igwe anaghị agba nchara SUS304 pavement, na-adịgide adịgide na igwe anaghị agba nchara n'ime afọ.
13. Cantilever mechanical Ọdịdị na-nakweere na n'akụkụ anwụ ngwa ule ule, na pneumatic loading nke nnyefe akụkụ na-eji melite n'ibu ike na stiffness nke dum igwe, dịkwuo ọrụ ndụ na izi ezi nke ule data, na n'ụzọ dị irè belata na-agba ọsọ mkpọtụ.
14. CNC machined ọkọlọtọ fixture, ọdịdị nwere ike mma na-egosipụta n'ibu Njirimara nke ahụ mmadụ.
15. The software nwere ike ọgwụgwụ usoro ngosi ngosi n'oge mpịakọta usoro nke roller, nke nwere ike intuitively ịhụ analysis nke mkpakọ ike ọgwụgwụ nke matraasi n'okpuru ala ibu.

Dabere na ọkọlọtọ

Ngwa ahụ kwekọrọ na GB / T 26706-2011 "ihe dị nro arịa ụlọ aja aja aja na-agbanwe matraasi"; TS EN 1957: 2012 chọrọ maka nnwale igwe.

  • Nke gara aga:
  • Osote: