LT-JJ32 Gwajin sifa mai ƙima don katifa da gadon gado

Siffofin fasaha

A. Ignition tushen tsarin: biyu sets na bakin karfe kone tube, daya ciki diamita (8 ± 0.1mm) ciki diamita (6.5 ± 0.1mm) tsawon (200 ± 5mm).

B. Hose: tsawon (2.5 ~ 3mm) diamita na ciki (7 ± 1mm) za a haɗa shi da bututun konewa na bakin karfe.

C. Tsarin kula da ruwa: ya haɗa da mita mai gudana, bawul ɗin trimming, bawul ɗin sauyawa da bawul mai daidaita matsa lamba.

D. Ana buƙatar kwararar ruwa don zama (45 ± 2) m1 / min, kuma matsa lamba na ƙima wanda tsarin ya bayar shine 2.8kpa.

E. Tsawon lokaci: 0-999s. Yana iya nunawa da rikodin lokacin ci gaba ko ɓarna, lokacin fashe masana'anta da samfurin yana kashe lokacin bi da bi.

F. Gwajin nisa don masu kunna wuta: 20-80 daidaitacce, tare da injin kunnawa don motsi ta atomatik da fitarwa.

G. Ma'aunin ma'auni: 10 ~ 100m1/min.

A. hasken sigari.

B. taba sigari ne na sigari tare da tacewa ko ba tare da tacewa da fakitin dubawa ba, kuma sun cika waɗannan buƙatu: tsayi: 60 ± 5mm; Diamita: 8± 0.5mm; Mass kowane tsayin raka'a0.6± 0.1) g/50mm.

C. Sigari yana ƙone lokaci12± 3) min/50mm.

D. A irin nau'in sigari, kowane sanduna 10 ne rukuni, daga cikinsu ana zabar ɗaya ba da gangan ba, kuma ana auna lokacin kona sigari a cikin dakin gwaje-gwaje kamar haka: bayan an riga an gama sigari, a fitar da sanda 1, sannan yi alama a 5mm da 55mm nesa da ƙarshen kunnawa. Saka ƙarshen sigari a kwance a kwance cikin ƙaramin ƙarfe na bakin ciki, tsayin shigar bazai wuce 11mm ba. Haske ƙarshen ƙonewa kuma gwada lokacin da aka kashe yana ƙone sigari tsakanin alamomin biyu.

1) Tsarin sarrafa kwamfuta, lokacin gwaji, lokutan gwaji, lokacin jinkiri, da sauransu ana iya saitawa da rubutawa a cikin kwamfutar. Tare da babban hankali, aikin menu na jagora, fasali mai sauƙi da fahimta, sanya sakamakon gwajin ya zama daidai.

2) aikin kunnawa ta atomatik (wutar lantarki mai girma).

3) ɗaukar hanyar PLC, duk suna amfani da na'urori masu inganci, tabbatar da ingantaccen tsarin, babban aiki mai sauri, ci gaba. PLC+PID da aka shigo da shi tsarin gwajin sarrafa atomatik, shine mafi ci gaba, mafi aminci, mafi aminci, mafi dacewa hanyar sarrafawa. Ikon ganowa ta atomatik, ganowa ta atomatik, ƙirar nunin abokantaka, don ganowa yayi aiki da sauri da daidaito. An ƙera kwamfutar ta sama tare da software na daidaitawa, wanda zai iya haifar da yanayin sarrafa zafin jiki ta atomatik da bayar da rahoton fitarwa, tattara bayanai da buga sakamakon gwaji.

4) Kwamfuta mai alamar lenovo: girman allo: 18.5 inci, ƙirar CPU: AMD flash X2 190, mitar CPU: 2500MHz, ƙarfin ƙwaƙwalwar ajiya: 2GB DDR3, ƙarfin faifai: 250GB 7200rpm, guntu mai hoto SATA2: babban aiki hadedde katin zane Shared. Ƙarfin ƙwaƙwalwar ajiya, nau'in cd-rom: dvd-rom tsarin aiki: WINDOWS XP, nau'in katin zane: hadedde katin zane.

5) printer daya.

6) saitin software guda ɗaya, haɓakawa kyauta don rayuwa.

Yi daidai da ma'auni