LT - JJ05 kujera kujera ja baya maimaita gwajin inji (nau'in turawa gaba)
Bugu da ƙari, na'urar tana kimanta dorewar kujerar baya, tana nazarin ikonta na jure ƙarfin da aka yi amfani da ita yayin amfani na yau da kullun. Wannan yana taimaka wa masana'antun su gano duk wani rauni na tsari ko ƙira, yana ba su damar yin gyare-gyaren da suka dace da haɓaka ingancin gaba ɗaya da dorewar kujera.
Yana bawa masana'antun damar sadar da kujerun ofis waɗanda suka cika ko wuce matsayin masana'antu. Yana ba da garantin cewa injin karkatar da kujera da baya na iya jure wa dogon lokaci, samar da masu amfani da ingantaccen wurin zama abin dogaro.
A taƙaice, wannan na'ura mai ɗorewa yana taka muhimmiyar rawa wajen kimanta tsarin karkatar da kujera da dorewar kujera. Cikakken ƙarfin gwajin sa yana ba masana'antun damar haɓaka inganci da aikin kujerun ofis ɗin su, tabbatar da gamsuwar abokin ciniki da dogaro na dogon lokaci.
Siffofin fasaha
1.Load nauyi | 225 LBS |
2.Nisa na dandalin gwaji | 1000mm |
3.Mafi girman fitarwa | 600mm |
4.Mai watsawa | 200kg |
5.The Silinda za a iya gyara | a kusurwar digiri 90 |
6.Wutar lantarki (power) | 220VAC/2A |
7.Matsakaicin daidaitacce gwajin sake zagayowar silinda | 20RPM |
8.Tushen iska: matsa lamba: | ≥ 0.5mpa; Yawan gudu: ≥800L/min; Ana tace tushen iska kuma a bushe |
Girman jiki | L1780*W1000*H1850 mm |
Nauyi | kusan 260kg |
Tsarin sarrafawa | |
1. Multi-aiki, daidaitacce tsawo na Silinda da kuma fitarwa Angle; | |
2. Ƙarfin fitarwa na silinda na zaɓi na zaɓi ko aiki iyaka; | |
3. Allon taɓawa + Ikon PLC, tare da kashewa / kashe ƙwaƙwalwar ajiya da aikin dakatarwa. | |
Wka'idar orking | |
1. Kwaikwayi jiki yana jingina baya akan kujera, da gwada aikin bayan kujera; | |
2. An sanya nauyin nauyin kilo 225 a kan wurin zama, kuma ana amfani da ƙarfin fitarwa na silinda akai-akai a tsaye a baya na kujera; | |
3. Yi rikodin lokutan gwaji na kujerar baya da kuma kimanta aikin kujerar baya. | |
Cbisa ga ma'auni | |
QB/T 2280-2016 | BIFMA X5.1-2017 |
EN 1335:2000 |